it's a little complicated but should be easy to do, this only works however on nicks with the Nickserv command GROUP, if you need help wondering what that does, type /msg Nickserv HELP GROUP and it should be explainitory.
Under Popups, Status Window
- Code: Select all
Cycle "Your Nicks" {
/nick <First Nick>
/timer[-d] 1 5 /msg Nickserv IDENTIFY <password>
/timer 1 6 /nick <Second Nick>
/timer 1 7 /nick <Third Nick>
/timer 1 8 /nick <Fourth Nick>
}
Repleat ad nasuem making sure that with each new nick, add 1 to the 5, 6, 7, 8 line ie.
- Code: Select all
Cycle "Your Nicks" {
/nick <First Nick>
/timer[-d] 1 5 /msg Nickserv IDENTIFY <password>
/timer 1 6 /nick <Second Nick>
/timer 1 7 /nick <Third Nick>
/timer 1 8 /nick <Forth Nick>
/timer 1 9 /nick <Fifth Nick and so on>
}
the timers will go off in sequence giving Nickserv enough time to register that you've changed your nick so lags don't miss nicknames
I don't think you can make this a "On Connect, perform" line so instead use this in lieu of identifying the nick you had when you connect.
Hope this helps, send me a message if you have trouble, and if you can make this tons better then feel free, I could use a better one lol